General Housings
General Purpose Housing GPH- 10 (No Viewport)
Are you looking for a gargantuan underwater housing to protect bigger electronics down to 2800m?
The GPH-10 is an aluminum underwater housing that is extremely versatile. Rated to a depth of 2800m (9.200ft), this canister is 16.5" long (42cm). The outside diameter is 4.5" (11.5cm). The GPH 10 offers a 15" x 3.5" (38cm x 9.5cm) internal space area that can house various electronics, sensors,and batteries This canister can also be drilled to interface with a Scout/Benthic/Abysso via a waterproof connector. Well Made in Florida, USA.
Our clients use this canister to house:
- Additional battery /control boards
- Sensors
- Board level cameras, batteries and control boards (Arduino / Raspberry type).
- ROV component
As you can see, its use is only limited by your imagination
View full product details
General Purpose Housing GPH- 2800m (NO viewport)
The GPH -2800m is a newer version of the GPH-1750m, specifically made to go deeper.
The GPH-2800m is an aluminum underwater housing that is extremely versatile. Rated to a depth of 2800m (9.200ft), this canister is 6.6" long (17cm). The outside diameter is 3.4" (8.8cm). The GPH offers a 5.25"x2.5" (13cm x 6.3cm) internal space area that can house various electronics, sensors,and batteries This canister can also be drilled to interface with a Scout/Benthic via a waterproof connector. Well Made in Florida, USA.
Our clients use this canister to house:
- Additional battery /control boards
- Sensors
- Board level cameras, batteries and control boards (Arduino type).
As you can see, its use is only limited by your imagination
View full product details
General Purpose Housing GPH- 2800m (with view-port)
The GPH -2800m is a newer version of the GPH-1750m, specifically made to go deeper. This housing has a view-port.
The GPH-2800m is an aluminum underwater housing that is extremely versatile. Rated to a depth of 2800m (9.200ft), this canister is 7.8" long (19.5cm). The outside diameter is 3.4" (8.8cm). The GPH offers a 5.25"x2.5" (13cm x 6.3cm) internal space area that can house various electronics, sensors,and batteries. The view-port also allows this housing to be used with small, streamline cameras or light. This canister can also be drilled to interface with a Scout/Benthic/Abysso via a waterproof connector. Well Made in Florida, USA.
Our clients use this canister to house:
- Additional battery /control boards
- Sensors
- Board level cameras, batteries and control boards (Arduino type).
- ROV component
As you can see, its use is only limited by your imagination
View full product details
General Purpose Housing GPH-1750 (with viewport)
Need a rugged canister to protect delicate electronics or a flashlight? This is it.
The GPH-1750m is an aluminum underwater housing that is extremely versatile. Rated to a depth of 1750m (5,700ft), this canister is 8.25" long (21 cm). The outside diameter is 3" (7.6cm). The GPH offers a 6.4"x2.5" (16.3cm x 6.3cm) internal space area that can be used for streamlined POV cameras such as Sony, JVC, Drift, Contour, Bullet, etc. It can be used with a Raspberry Pi 3/4/5 or similarly sized micro processor. This housing features an acrylic lens. This canister can also be drilled to interface with a Abysso/Benthic via a waterproof connector. Well Made in Florida, USA.
Our clients use this canister to house:
- Flashlight/ video lights
- Lasers
- Additional battery /control boards
- Sensors
- Board level cameras, batteries and control boards (Arduino type).
As you can see, its use is only limited by your imagination
View full product details
General Purpose Housing GPH2 -1750m (with view-port)
Need a longer rugged extreme depth canister with a view-port to protect delicate electronics or a flashlight? This is it.
The GPH2 - 1750m is an aluminum underwater housing that is extremely versatile. Rated to a depth of 1750m (5,700ft), this canister is 11.5" long (28.5cm). The outside diameter is 3" (7.6cm). The GPH offers a 9.5" x 2.5" (24cm x 6.3cm) internal space area that can be used for streamlined POV cameras such as Sony, JVC, Drift, Contour, Bullet, etc. This housing features an acrylic lens. This canister can also be drilled to interface with a Scout/Benthic /Abysso via a waterproof connector. Well Made in Florida, USA.
Our clients use this canister to house:
- Flashlight/ video lights
- Lasers
- Additional battery /control boards
- Sensors
- Board level cameras, batteries and control boards (Arduino type).
- ROV hardware
As you can see, its use is only limited by your imagination
View full product details
General Purpose Housing GPH2 -2800m (NO Viewport)
Need a longer rugged extreme depth canister protect delicate electronics or batteries? This is it. This is the newer version of the GPH2 1750m, but for deeper work.
The GPH2 - 2800m is an aluminum underwater housing that is extremely versatile. Rated to a depth of 2800m (9,200ft), this canister is 10.5" long (27cm). The outside diameter is 3.5" (8.8cm). The GPH offers a 9.2" x 2.5" (23cm x 6.3cm) internal space area for various electronics/ batteries. This canister can also be drilled to interface with a Scout/Benthic /Abysso via a waterproof connector. Well Made in Florida, USA.
Our clients use this canister to house:
- Additional battery /control boards
- Sensors
- Board level cameras, batteries and control boards (Arduino type).
- ROV hardware
As you can see, its use is only limited by your imagination
View full product details
General Purpose Housing GPH2 -2800m (WITH Viewport)
Need a longer rugged extreme depth canister protect delicate electronics or batteries? This is it. This is the newer version of the GPH2 1750m, but for deeper work. This housing has a viewport.
The GPH2 - 2800m is an aluminum underwater housing that is extremely versatile. Rated to a depth of 2800m (9,200ft), this canister is 11.8" long (29.5cm). The outside diameter is 3.5" (8.8cm). The GPH offers a 9.2" x 2.5" (23cm x 6.3cm) internal space area for various electronics/ batteries. With a viewport, this housing can be used with steamlined cameras and lights. This canister can also be drilled to interface with a Scout/Benthic /Abysso via a waterproof connector. Well Made in Florida, USA.
Our clients use this canister to house:
- Additional battery /control boards
- Sensors
- Board level cameras, batteries and control boards (Arduino type).
- ROV hardware
As you can see, its use is only limited by your imagination
View full product detailsGroup B Distribution Inc., Jensen Beach, Florida, USA. Tel: +1 (772) 631-0411. For more info, please email Frank@GroupBinc.com. DUNS:078742607, SAM CAGE# 6ZSM3
Group B Distribution Inc specializes in designing and manufacturing action camera underwater housings and other deep sea exploration gear for extreme depth and hostile filming environment.
© 2024 Group B Distribution Inc.
All rights reserved.
Powered by Shopify
