Accessories / Spares (click on pics for details)

360 Degree Mount For Scout and Benthic Underwater Housings

Do you use a Scout or Benthic  camera housing? Get this mount!

We start with a T6061 aluminum billet that is then carved out with a CNC machine and a lathe. This process, while much more time consuming, yields a precisely built custom mount that is made to last. So if you find yourself filming in extreme conditions where your equipment will take a beating, this is the mount you want.

This mount allows the Scout or Benthic housing to be rotated 360 degrees as well as be adjusted up and down.

The square base of the mount is 2.5" x 2.5" (6.2cm x 6.2cm) and has been drilled in all four corners. Use these holes to secure the mount with bolts/nuts to whatever surface you are going to use.The mount is fully anodized to resist corrosion. All screws and washers are stainless steel.

Well Made in Florida, USA.

*Benthic housing and/or action camera not included.

Legal Disclaimer: Group B Distribution Inc is not associated, authorized, endorsed by, or in any way officially connected Sony, JVC, SJCAM,  Contour or other action camera manufacturers. We proudly design and manufacture our own gear independently.  This product and/or service is not affiliated with, endorsed by, or in any way associated with GoPro ® Inc. or its products and services. GoPro, HERO, Karma, Session and their respective logos are trademarks or registered trademarks of GoPro, Inc.

9-24v Battery Eliminator for GoPro® HERO® 3 and 3+

$ 25.00

Custom Clamp for GPH unit

This is the best way to secure your GPH housing.

This super tough was designed specifically for the GPH housing. This clamp has a bottom mount that allows the user to easily attach the GPH to our VideoFin Pro or to most flat surfaces. The mount allows for the GPH housing to adjusted up/down and right/left. We use billet T6061 aluminum which is then anodized. All components are stainless steel. Well Made in Florida, USA.

If you're shooting underwater videos with underwater lights, you may notice lots of light being reflected on floating sediments. To eliminate that effect, the video light should be set at a different angle than that of the camera. This clamp allows for easy and secure adjustments if you are using the GPH as a flashlight housing.

** GPH/flashlight not included

Expedition Spare Pack - Abysso

Going on a remote expedition? Play it safe and get an Expedition Spare Pack.

These packs include all the spares you will need for your Abysso housing:

• Spare lens (1)
• Spare lens O-rings (20)
• Spare housing O-rings (20)
• Spare housing mount (1)
• Spare housing/ bezel stainless steel screws (10)
• Spare mount screws (6) 
• Hex wrenches (2)

Expedition Spare Pack - Benthic

Going on a remote expedition? Play it safe and get an Expedition Spare Pack.

These packs include all the spares you will need for your Benthic housing:

• Spare lens (1)
• Spare lens small O-rings (10)
• Spare lens medium O-rings (10)
• Spare housing O-rings (20)
• Spare housing mount (1)
• Spare housing stainless steel screws (8)
• Bezel stainless steel screws (2)
• Spare mount screws (6) 
• Hex wrench (2)

Expedition Spare Pack - Benthic Extension Housing

Going on a remote expedition? Play it safe and get an Expedition Spare Pack.

These packs include all the spares you will need for your Benthic Extension Housing:

• Spare housing O-rings (20)
• Spare housing mount (1)
• Spare extension stainless steel screws (5)
• Spare mount screws (6) 
• Hex wrenches (2)

Expedition Spare Pack - GPH

Going on a remote expedition? Play it safe and get an Expedition Spare Pack.

These packs include all the spares you will need for your GPH housing:

• Spare lens (1)
• Spare lens  O-rings (15)
• Spare housing O-rings (30)
• Spare Stainless Steel clamps (2)

Expedition Spare Pack - Scout

Going on a remote expedition? Play it safe and get an Expedition Spare Pack.

These packs include all the spares you will need for your Scout housing:

• Spare lens (1)
• Spare lens O-rings (20)
• Spare housing O-rings (20)
• Spare housing mount (1)
• Spare housing/ bezel stainless steel screws (10)
• Spare mount screws (6) 
• Hex wrenches (2)

Expedition Spare Pack - Scout Extension

Going on a remote expedition? Play it safe and get an Expedition Spare Pack.

These packs include all the spares you will need for your Scout Extension Housing:

• Spare housing O-rings (20)
• Spare housing mount (1)
• Spare extension stainless steel screws (5)
• Spare mount screws (6) 
• Hex wrenches (2)

General Purpose Housing Adapter

The General Housing Adapter is made to link together several GPH 1750m series (not for GPH 2800m or GPH 10) . Suppose you want to add several control boards and a large battery pack to your video camera or flashlight set up. By adding this adapter ring, one GPH could be dedicated to storing batteries while the other GPH houses your control boards. Several GPH can be safely attached together this way.

OD: 3" (76mm) ID: 2.32" (59mm)

Housing Mount

This the mount that comes standard with our Benthic, Scout, and Extension housings. This mount is machines out of billet T6061 aluminum and anodized to resist corrosion. Made to take abuse and still last a very long time. Well Made in Florida, USA

Long Camera Mount

Need a long camera mount?

This is the extra long version of the standard camera mount stud. These are CNC'ed out of  solid T6061 aluminum rods, then anodized to resist corrosion. Get it as a spare or to add another  Benthic or Scout housing to your VideoFin Pro. These can also be used independently to mount on a hard surface. Compatible only with the Benthic or Scout housing mount. Well Made in Florida, USA.

• Length is 3.75" (9.6cm), width is 0.75" (1.9cm)
• Stainless steel bolts (4)
• Stainless steel nuts (4)
• Stainless steel washers (6)

Long GPH Clamp Mount

Need a longer mount for your GPH?

This is the extra long version of the standard GPH mount stud. These are CNC out of a solid T6061 aluminum rods, then anodized to resist corrosion. Get it as a spare or to add another GPH housing to your VideoFin Pro. These can also be used independently to mount on a hard surface. Compatible only with the GPH clamp only. Well Made in Florida, USA.

• Length is 3.75" (9.6cm), width is 0.75" (1.9cm)
• Stainless steel bolts (4)
• Stainless steel nuts (4)
• Stainless steel washers (6)

Spacer Plug

Standard Camera Mount

This is the standard camera mount stud that is supplied with the VideoFin Pro system. These are CNC'ed out of a solid T6061 aluminum rods, then anodized to resist corrosion. Get it as a spare or to add another Benthic or Scout housing to your VideoFin Pro. These can also be used independently to mount on a hard surface. Compatible only with the Benthic or Scout housing mount. Well Made in Florida, USA.

• Length is 1.75" (4.45cm), width is 0.75" (1.9cm)
• Stainless steel bolts (4)
• Stainless steel nuts (4)
• Stainless steel washers (6)

Underwater Connector Spacer

Are you connecting one of our housings to another one or to your ROV?

This spacer fits outside the housing, minimizing the intrusion of the undersea connector into the housing itself. This spacer can be used on any of our housings, including the end cap of a GPH. We offer two of the most common sizes, 7/16th with a 20 thread or 1/2" also with a 20 thread. Our price includes the cost of drilling the housing. This spacer is made of T6061 and anodized. Well Made in Florida, USA.

We can manufacture other sizes if necessary. Lead time is 3-5 weeks.